Installazione dei driver Apple Sync senza iTunes

Per la sincronizzazione con i dispositivi Apple iOS, MediaMonkey per Windows richiede l'installazione degli Apple Mobile Device Driver più recenti. Normalmente, questa operazione si esegue installando la versione desktop di iTunes, ma se preferisci non installare iTunes e sei portato per la tecnologia, puoi installare Apple Mobile Device Driver e i suoi servizi indipendentemente da iTunes utilizzando diversi metodi. Tieni presente che questi metodi non sono supportati per la sincronizzazione con iOS, poiché potrebbero non funzionare per tutti gli utenti.

Se hai già installato/disinstallato iTunes:

  1. Installa i driver da una copia residua dei driver sull'unità C:
    • Vai a C:\Programmi\File comuni\Apple\Mobile Device Support\Drivers
    • Fare clic con il tasto destro del mouse su usbaapl64.inf e fare clic su "Installa"
  2. OPPURE, installa i driver utilizzando il gestore dispositivi
    • Collega il tuo iPhone/iPad
    • Fare clic sul pulsante Start di Windows ed eseguire 'Gestione dispositivi'
      • Fare clic su Dispositivi/controller Universal Serial Bus e fare clic con il pulsante destro del mouse sui dispositivi Apple Mobile USB per aggiornarli e abilitarli
      • OPPURE, fai clic su Dispositivi portatili > Apple iPhone e fai clic con il pulsante destro del mouse per aggiornarlo e abilitarlo

Se non hai mai installato iTunes

  1. Installa i driver direttamente da iTunes (senza installare iTunes)
    • Scarica l'ultima versione desktop di iTunes ( versione a 64 bit | versione a 32 bit ).
    • Scarica e installa un programma in grado di aprire ed estrarre il contenuto da un file CAB, come 7-zip o WinRar .
    • Esamina il contenuto del programma di installazione di iTunes iTunes64Setup.exe o iTunesSetup.exe (scaricato nel passaggio 1) con 7-zip (clic destro, 7-zip, Apri archivio). 7-zip mostrerà i file all'interno del programma di installazione.
    • Estrarre AppleMobileDeviceSupport64.msi o AppleMobileDeviceSupport.msi dal file di installazione sul disco rigido.
    • Esegui AppleMobileDeviceSupport64.msi o AppleMobileDeviceSupport.msi
    • Dopo aver installato Apple Mobile Device Support, collega il tuo dispositivo iOS al PC e Windows dovrebbe essere in grado di rilevarlo correttamente.
    • Avvia MediaMonkey e il tuo dispositivo Apple verrà rilevato, così potrai utilizzare MediaMonkey per Windows per sincronizzarlo con il dispositivo.
  2. OPPURE installa i driver senza installare iTunes utilizzando un'app di terze parti (nota che queste non sono supportate da Apple o MediaMonkey). Le possibili opzioni sono:

Qualunque sia l'approccio scelto, assicurati che sia installato un solo set di driver per evitare conflitti e tieni presente che il dispositivo non sarà visibile in Windows finché non rispondi al prompt del dispositivo "Considera attendibile" questo computer quando lo colleghi.

Si applica a: ,

Translated automatically (see original)

Installing Apple Sync Drivers without iTunes

To Sync with Apple iOS devices, MediaMonkey for Windows requires the latest Apple Mobile Device Drivers to be installed. This is normally done by installing the iTunes desktop version, but if you prefer not to install iTunes, and are technically inclined, you can install the Apple Mobile Device Driver and its services independently of iTunes using a number of approaches. Note that these approaches aren’t supported for iOS synchronization as they may not work for all users.

If you’ve previously installed/uninstalled iTunes:

  1. Install the drivers from a residual copy of the drivers on your C: drive
    • Navigate to C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    • Right-click on usbaapl64.inf and click ‘Install’
  2. OR, Install the drivers using the device manager
    • Connect your iPhone/iPad
    • Click the Windows Start button and run the ‘Device Manager’
      • Click Universal Serial Bus devices/controllers and right-click on the Apple Mobile USB Devices to Update & Enable them
      • OR, Click Portable devices > Apple iPhone and right-click to Update & Enable it

If you’ve never installed iTunes

  1. Install the drivers directly from iTunes (without installing iTunes)
    • Download the latest desktop version of iTunes ( 64-bit version | 32-bit version ).
    • Download and install a program that can open and extract contents from a CAB file such as 7-zip or WinRar .
    • Inspect the content of the iTunes installer iTunes64Setup.exe or iTunesSetup.exe (that you downloaded in step 1) with 7-zip (right click, 7-zip, Open archive). 7-zip will show the files inside the installer.
    • Extract AppleMobileDeviceSupport64.msi or AppleMobileDeviceSupport.msi from the installer file to your harddisk.
    • Run AppleMobileDeviceSupport64.msi or AppleMobileDeviceSupport.msi
    • After Apple Mobile Device Support have been installed, connect your iOS device to your PC and Windows should be able to detect it correctly.
    • Start MediaMonkey and your Apple device will be detected, so that you can use MediaMonkey for Windows to Sync to the device.
  2. OR install the drivers without installing iTunes using a third party app (note that these aren’t supported by Apple or MediaMonkey). Possible options are:

Whichever approach you take, ensure that only a single set of drivers is installed to avoid conflicts, and note that the device will not be visible in Windows until you respond to the device prompt to ‘Trust’ this computer when you connect it.

Applies to: ,

Hide original

Questo articolo ti è stato utile?