La riproduzione si interrompe quando lo schermo si spegne

Windows può disattivare i dispositivi audio USB e l'hardware di rete quando lo schermo si spegne. Questo può causare l'interruzione della riproduzione quando si utilizza un dispositivo audio USB, quando si riproducono file da una condivisione di rete/server DLNA o quando si esegue lo streaming tramite Chromecast/DLNA a un client.

Per dispositivi audio USB:

  1. Utilizzare Microsoft USBView per individuare l'HUB USB a cui è collegata la scheda audio
  2. In Gestione dispositivi individua lo stesso HUB in Dettagli -> ID hardware
  3. Vai alla gestione dell'alimentazione
  4. Disabilita Consenti al computer di spegnere questo dispositivo per risparmiare energia -> OK (per confermare le modifiche)
  5. Chiudere tutte le impostazioni e riavviare Windows (facoltativo per verificare se l'impostazione è persistente)

Per l'hardware di rete:

  1. In Gestione dispositivi, sotto il nodo Rete, individua l'adattatore WiFi/LAN
  2. Vai alla gestione dell'alimentazione
  3. Disabilita Consenti al computer di spegnere questo dispositivo per risparmiare energia -> OK (per confermare le modifiche)
  4. Chiudere tutte le impostazioni e riavviare Windows (facoltativo per verificare se l'impostazione è persistente)

Si applica a: ,

Translated automatically (see original)

Playback Stops when Screen Turns Off

Windows can disable USB Sound Devices and Network Hardware when the screen turns off. This can cause playback to be stopped when using an USB Sound Device, when playing files from a network share/DLNA Server or streaming via Chromecast/DLNA to a client.

For USB Sound Devices:

  1. Use Microsoft USBView to locate USB HUB where sound card is connected
  2. In Device manager locate same HUB under Details -> Hardware ID
  3. Go to power management
  4. Disable Allow the computer to turn off this device to save power -> OK (to confirm changes)
  5. Close all settings and restart Windows (Optional to see if setting is persistent)

For Network Hardware:

  1. In Device manager under Network tree node locate WiFi/LAN Adapter
  2. Go to power management
  3. Disable Allow the computer to turn off this device to save power -> OK (to confirm changes)
  4. Close all settings and restart Windows (Optional to see if setting is persistent)

Applies to: ,

Hide original

Questo articolo ti è stato utile?